A WATER BATH is laboratory equipment made from a container filled with heated water. It is used to incubate samples in water at a constant temperature over a long period of time. It is also used to enable certain chemical reactions to occur at high temperature.
Water baths are used in industrial clinical laboratories, academic facilities, government research laboratories environmental applications as well as food technology and wastewater plants. Because water retains heat so well, using water baths was one of the very first means of incubation. Applications include warming of reagents, melting of substrates or incubation of cell cultures, sample thawing, bacteriological examinations, warming reagents, coliform determinations and microbiological assays.
1) WATER BATH- (Constant Temperature)
SALIENT FEATURES & TECHNICAL SPECIFICATIONS:
- Double wall Leak proof argon welded construction with Inner made of Stainless Steel – 304 Grade & Exterior Mild Steel with powder coat finish (STD Model) / Exterior Fully Stainless Steel with Dull Matt finish (GMP Model).
- High density glass wool insulation between walls to minimize the heat loss.
- Heating is done by U shaped / Immersion type heaters.
- Temperature controlled by microprocessor-based auto tune PID digital temperature controller with PT 100 as sensor with Temp. Accuracy: ± 1 °C or Better.
- Temperature Range: 5°C above ambient to 95°C
- A high-speed stirrer with a motor of 1/20 HP is fitted for better temperature uniformity
- Toughen glass window on both sides.
- Supplied without Lid.
- Operates on 230 Volts AC Single phase 50 Hz
OPTIONAL ACCESSORIES:
- Electronic digital Timer Range 0 to 999
- Low Water level cut off device with suitable sensor for protection of heaters
- Lid cover.
| MODEL | Chamber Size in Inches | RATING in Watts |
|---|---|---|
| DPS-WB-CT1 S/G | 12 x 10 x 8 | 1500 |
| DPS-WB-CT2 S/G | 14 x 12 x 10 | 2000 |
| DPS-WB-CT3 S/G | 18 x 14 x 12 | 2500 |
2) WATER BATH- (Round)
SALIENT FEATURES & TECHNICAL SPECIFICATIONS:
- Double wall Leak proof argon welded construction with Inner made of Stainless Steel – 304 Grade & Exterior Mild Steel with powder coat finish (STD Model) / Exterior Fully Stainless Steel with Dull Matt finish (GMP Model).
- High density glass wool insulation between walls to minimize the heat loss.
- Heating is done by U shaped / Immersion type heaters.
- Temperature controlled by microprocessor-based auto tune PID digital temperature controller with PT 100 as sensor with Temp. Accuracy: ± 1 °C or Better.
- Temperature Range: 5°C above ambient to 95°C
- A high-speed stirrer with a motor of 1/20 HP is fitted for better temperature uniformity
- Toughen glass window on both sides.
- Supplied without Lid.
- Operates on 230 Volts AC Single phase 50 Hz
OPTIONAL ACCESSORIES:
- Dual display Microprocessor based PID Temp. Controller with Temp. Accuracy: ± 1 °C or Better.
- Low Water level cut off device with suitable sensor for protection of heaters
- Lid cover.
| MODEL | FLASK CAPACITY | Working Size Dia x Ht | RATING in Watts |
|---|---|---|---|
| DPS-WB-RD1 S/G | 1 Ltr | 7” x 7” | 500 |
| DPS-WB-RD2 S/G | 2 Ltrs. | 8” x 8” | 750 |
| DPS-WB-RD3 S/G | 3 Ltrs | 9” x 9” | 750 |
| DPS-WB-RD4 S/G | 5 Ltrs. | 10” x 10” | 1000 |
| DPS-WB-RD5 S/G | 10 Ltrs. | 14” x 14” | 1500 |
| DPS-WB-RD6 S/G | 20 Ltrs. | 16” x 16” | 2000 |
3) WATER BATH- (Rectangular / Paraffin)
SALIENT FEATURES & TECHNICAL SPECIFICATIONS:
- Salient Features & Technical Specifications:
- Double wall Leak proof argon welded construction with Inner made of Stainless Steel – 304 Grade & Exterior Mild Steel with powder coat finish (STD Model) / Exterior Fully Stainless Steel with Dull Matt finish (GMP Model).
- High density glass wool insulation between walls to minimize the heat loss.
- Heating is done by U shaped / Immersion type heaters.
- Temperature Range: 5°C above ambient to 99°C
- A high-speed stirrer with a motor of 1/20 HP is fitted for better temperature uniformity
- Toughen glass window on both sides.
- Supplied without Lid.
- Operates on 230 Volts AC Single phase 50 Hz
OPTIONAL ACCESSORIES:
- Dual display Microprocessor based PID Temp. Controller with Temp. Accuracy: ± 1 °C or Better.
- Low Water level cut off device with suitable sensor for protection of heaters
- Lid cover.
| MODEL | Bath Size in cmL x W x D | LID SIZE | RATING in Watts |
|---|---|---|---|
| DPS-WB-RC1 S/G | 35 x 25 x 10 | 6 HOLES OF 7.5 cm Dia | 1000 |
| DPS-WB-RC2 S/G | 35 x 25 x 10 | 12 HOLES OF 7.5 cm Dia | 1500 |
4) WATER BATH- (Serological / Universal)
SALIENT FEATURES & TECHNICAL SPECIFICATIONS:
- Salient Features & Technical Specifications:
- Double wall Leak proof argon welded construction with Inner made of Stainless Steel – 304 Grade & Exterior Mild Steel with powder coat finish (STD Model) / Exterior Fully Stainless Steel with Dull Matt finish (GMP Model).
- High density glass wool insulation between walls to minimize the heat loss.
- Heating is done by U shaped / Immersion type heaters.
- Temperature Range: 5°C above ambient to 80°C
- Supplied without Lid.
- Operates on 230 Volts AC Single phase 50 Hz
OPTIONAL ACCESSORIES:
- Dual display Microprocessor based PID Temp. Controller with Temp. Accuracy: ± 1 °C or Better.
- Low Water level cut off device with suitable sensor for protection of heaters
- Lid cover.
| MODEL | Bath Size in cmL x W x D | RACKS can be ACCOMMODATE | RATING in Watts |
|---|---|---|---|
| DPS-WB-SR1 S/G | 10 x 7 x 6 | 2 | 500 |
| DPS-WB-SR2 S/G | 14 x 10 x 6 | 4 | 1500 |
| DPS-WB-SR3 S/G | 18 x 10 x 6 | 6 | 2000 |
| DPS-WB-SR4 S/G | 20 x 12 x 6 | 8 | 2500 |
5) WATER BATH- (Low Temperature Cryostat)
Low Temperature Cryostat Bath also known as cooling bath, it is required for collecting liquids after distillation, keeping temperature sensitive chemicals, while biochemical processing and studying the properties of different liquids. For maintaining appropriate conditions, traditional bath uses liquid nitrogen or dry ice according to the temperature requirements.
A Low Temperature water bath is a device that retains water at a constant temperature. It is mainly used in laboratory for incubations at the lower temperature, which can be easily controlled and maintained desired temperature for the specified duration of the time. Low Temperature Bath finds the application in Medical, Agricultural, Bio-Chemical Industrial, Research Laboratories & various other Industries.
SALIENT FEATURES & TECHNICAL SPECIFICATIONS:
- Double wall Leak proof argon welded construction with Inner made of Stainless Steel – 304 Grade & Exterior Mild Steel with powder coat finish (STD Model) / Exterior Fully Stainless Steel with Dull Matt finish (GMP Model).
- Units are highly insulated by thick PUF insulation between the walls
- Heating is done by S. S. tubular/ Immersion type heaters.
- Cooling is by hermetically sealed compressors with CFC free refrigerants
- Temp. Range: Ambient to 100 °C 0 °C TO 100 °C -20 °C to 100 °C -30 °C to 100 °C -40 °C to 100 °C
- Temperature controlled by microprocessor-based auto tune PID digital temperature controller with PT 100 as sensor with Temp. Accuracy: ± 1 °C or Better.
- Efficient motor of 1440 RPM top mounted is installed for stirring to get temp uniformity.
- Supplied without Lid.
- Operates on 230 Volts AC Single phase 50 Hz
OPTIONAL ACCESSORIES:
- Electronic Digital Timer Range from 0 to 999 Minutes.
- PC / Printer Interface
- Servo Controlled Voltage Stabilizer
- 21 CFR part 11 compliantsoftware.
SAFETY FEATURES:
- Redundant high temperature safety system with Alarm & safety Thermostat automatically cutsoff power to heaters if temperature exceeds 70° C.
- Inbuilt Overload protection relay for compressor
- Compressor ON delay timer, to safe guard the compressor
| MODEL | Bath Size in cmL x W x D | Capacity |
|---|---|---|
| DPS-WB-LT1 S/G | 10 x 8 x 8 | 15 |
| DPS-WB-LT2 S/G | 12 x 10 x 10 | 30 |